driving via canbus Eltek 2kW Flatpack2 supplies

Author Message


Joined: 02/02/2017
Location: Australia
Posts: 1117
Posted: 09:51am 29 Mar 2020      

The flatpack2 48V 2KW has a output voltage range of 43.5 to 57.6V
I suspect if I command it to go outside this range it will ignore me.
Max current is 41.7A at 48V which is 2001 W

I have not been able to set a current limit and see the unit hit the limit and not exceed it. But I can set any voltage and the unit alters output to the new setting.
(assuming it's within the limits..)
wronger than a phone book full of wrong phone numbers