Introducing the Colour Maximite 2


Author Message
matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 6491
Posted: 07:43am 08 May 2020      

You are still missing B11 and H4 which are the Nunchuck pins

Vref and VBAT should not be GND. VREF is 3.3 and VBAT is the battery

RESET, PDR_ON and BOOT0 are all system pins and should probably have a colour

E4, E5, E6, F10, H2, H3, H8, G12, D6 and G7 are all reserved to the Display controller

A8 is the test pin and outputs a clock pulse to check the processor is running