Charge controller help


Author Message
terrapinlogo

Newbie

Joined: 26/10/2009
Location: New Zealand
Posts: 21
Posted: 05:12am 24 Aug 2010      

pin 4 is at 0v all the time.
pin 5 is at 5.8 when there is no jumper and when the jumper is in charge position, it is at 1.95v when the jumper is in the dump position.
pin 6 is at 1.96v with no jumper 5.88 with the charge jumper and 0v with the dump dumper.
If it doesn't work hit it with a bigger hammer.
If it still doesn't work you probably shouldn't of hit it.