Charge controller help

Author Message


Joined: 26/10/2009
Location: New Zealand
Posts: 21
Posted: 03:51am 04 Sep 2010      

I have the board all going now but the turbine is strong enough that it pushes the voltage that the charge controller sees up to 15v when the battery is still at 12v. This is causing the relay to click on and off and sound like an angry blow fly. Any ideas on how I could add some sort of time delay so that the relay can only change state every minute or so. I'm thinking some sort of capacitor and resistor network but I have no idea on how to hook it up.
If it doesn't work hit it with a bigger hammer.
If it still doesn't work you probably shouldn't of hit it.