(MM) wild temp sensor readings


Author Message
jwettroth

Regular Member

Joined: 02/08/2011
Location: United States
Posts: 41
Posted: 05:34pm 13 Jan 2012      

A couple of things.

If you don't need much speed- you can bypass your cable with a capacitor or an RC if the load has trouble driving capacitive loads.

I am just starting to play with the Analog Inputs on an SM1 and am getting pretty poor results. The first reading that I get will be pretty good. If I run in a tight loop, the next reading will be down and the readings will settle out to about 70% of the initial reading. I'm using a 2.5v buffered reference as my voltage source and FW 3.0A.

Do you all get repeatable readings at semi fast rates. I'd like to read about 10 readings per second- not really very fast...

Thanks,
John

John Wettroth