Introducing the Pi-cromite: first steps


Author Message
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 3715
Posted: 03:38pm 04 Apr 2017      

I think the winters are too long in the mother country.

A small bug:
  Quote  > > for zz = 2 to 10 :print zz : next zz

2
3
4
5
6
7
8
9
10
> > for zz = 10 to 2 step -1 : print zz : next zz

> >


not happy with STEP -1
At the prompt, it does nothing. In a program it is likely to give an error but not on that line.

Not sure why I am getting the double prompt but I suspect it is to do with using CD LF pairs in my TeraTerm configuration. I usually have to change it when talking to a Pi. - Yes, changing sending CR on it's own fixes the double prompt (as well as double line spacing).

If you want to talk to a Pi with MMEdit, you will have to enable Telnet on the PI and that should only be done within secure networks. It is not something I have tried yet.
There is no way MMEdit can use SSH although I will dust off a copy of plink and see what hope there is that way.

Well done Peter
Jim

It all started with the ZX81....
VK7JH
http://www.c-com.com.au/MMedit.htm