Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : CMM2 pins for a 8 bit port ...
Author | Message | ||||
hitsware2 Guru Joined: 03/08/2019 Location: United StatesPosts: 705 |
I am having trouble finding 8 consecutive pins for a 8 bit port . Should I be looking at the P numbers on the attached ? There seems ( and my brain is burnt ) that there is a ground pin interrupting any 8 consecutive pins ? my site |
||||
lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3009 |
Why do you think consecutive is good or required? Quazee's new PCB design shows the allocation of the pins very clearly: Expansion Pinout ~ Edited 2020-09-25 09:47 by lizby PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
hitsware2 Guru Joined: 03/08/2019 Location: United StatesPosts: 705 |
my site |
||||
lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3009 |
... [,start,nbr] PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
Turbo46 Guru Joined: 24/12/2017 Location: AustraliaPosts: 1590 |
All of the pins don't have to be consecutive. Use the pin numbers as shown on page 10 of the manual. EG: PORT(2,4,7,2,10,2) IE: pins 2,3,4,5,7,8,10 and 11 Bill Keep safe. Live long and prosper. |
||||
hitsware2 Guru Joined: 03/08/2019 Location: United StatesPosts: 705 |
How does > PORT(2,4,7,2,10,2) Translate to > IE: pins 2,3,4,5,7,8,10 and 11 my site |
||||
vegipete Guru Joined: 29/01/2013 Location: CanadaPosts: 1082 |
4 pins starting at 2, 2 pins starting at 7, 2 pins starting at 10 Visit Vegipete's *Mite Library for cool programs. |
||||
hitsware2 Guru Joined: 03/08/2019 Location: United StatesPosts: 705 |
Thank You my site |
||||
Print this page |