Home
JAQForum Ver 20.06
Log In or Join  
Active Topics
Local Time 11:43 08 May 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : SMD Alternative for 1n4148

     Page 2 of 2    
Author Message
MicroBlocks

Guru

Joined: 12/05/2012
Location: Thailand
Posts: 2209
Posted: 11:13pm 12 Aug 2013
Copy link to clipboard 
Print this post

I suspected something like that.
I like the colors the maximites have. Good and bright. Staying with the 4148 seems the right thing to do, otherwise it would need experimenting with resistor values. And who knows maybe in the future there will be a modification. It would be best if the circuit is the same.

Microblocks. Build with logic.
 
robert.rozee
Guru

Joined: 31/12/2012
Location: New Zealand
Posts: 2292
Posted: 12:06am 13 Aug 2013
Copy link to clipboard 
Print this post

hadn't considered the voltage drop - you are right that a schottky diode will have a much lower forward drop and so be no good for clipping the video levels.

at a pinch you could use three BC847 transistors, each with base-collector shorted. this will provide you with the required 0.6v clipping level, and the BC847 comes in a sot23 package. 7 cents each in quantities of 250 from RS, us$2.30 for 100 with free shipping on ebay.
 
     Page 2 of 2    
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024