TheBackShed.com

Home	JAQForum Ver 20.06
Log In or Join
Active Topics
Local Time 09:19 01 May 2024	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : MM+ V5.1 ILI9341 BUG / Hardware ???

Author

Message

atmega8

Guru

Joined: 19/11/2013
Location: Germany
Posts: 712

Posted: 07:02am 26 Jan 2016

Copy link to clipboard

Print this post

Hello,

Micromite Explorer 64 with ILI9341.

Connected like OPTION LCDPANEL:

option lcdpanel ili9341, l, 60, 61, 62
SCK on PIN 4, SDA (SDI MOSI) on PIN5.

Voltage directly from the Explorer 64 board (GND/5Volt).

After above command, MM+ wants reboot.
After Reboot, WIN 10 enumerates no com Port, the typical windows sound, when USB Device is found is missing.
No terminalsession possible (Terraterm).

If i disconnect everything, same problem.
I can flash MM+ again, no problem.

But then the same thing happens as described.

Power Consumption 130 mA

Any Idea?Edited by atmega8 2016-01-27

atmega8

Guru

Joined: 19/11/2013
Location: Germany
Posts: 712

Posted: 08:12am 26 Jan 2016

Copy link to clipboard

Print this post

Update,

another Explorer 64 board works as expected..

Search for the reason..

atmega8

Guru

Joined: 19/11/2013
Location: Germany
Posts: 712

Posted: 08:25am 26 Jan 2016

Copy link to clipboard

Print this post

Strange....

i reflashed the controller, it gave a correct prompt etc., twice.

After this gui test lcdpanel worked.

Lesson learned, reflash before throwing it away.

THX

Print this page

To reply to this topic, you need to log in.