 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : MMEdit - #REPLACE Pi-cromite ESPBasic
  Page 2 of 2 |
|||||
| Author | Message | ||||
Chopperp Guru  Joined: 03/01/2018 Location: AustraliaPosts: 1032 |
Bugger!!! Delete reference to above. Now not doing this. ChopperP |
||||
disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 844 |
After the program is assigned I load and run using this icon.  The /* */ directives might be bringing you undone. Anything inside these is treated as a comment and would not be loaded. Try removing them. Note from PDF about this thing that happens when you initially assign the program. Start MMEdit and assign the MMReplace.exe command to menu Advanced/Run External Program by holding the Shift when selecting the menu item. Note: The above step will run MMReplace and place the modified code back in the MMEdit window. You can use the Edit/Undo to restore the original code. This only happens here, in normal operation the modified code is loaded and NOT placed back in the MMEdit window. regards Gerry Latest F4 Latest H7 |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1032 |
Hi Gerry Yeh, I did read the bit about the undo. Thks Just reloaded MMEdit & it started doing what I said two posts ago which is good. It is also leaving the TEMP.BAS file in the MMEDit Directory which can then be changed to a *.lib file. Hitting the Run button loads the library file into the CMM as TEMP.BAS then deletes it from the DIR which is not quite what is wanted. Hitting Advance, Run Ext Prog, does not load it to the CMM & leaves the TEMP.BAS file there. It is still ignoring the FILENAME.LIB I need the /* & */ to isolate the libraries that I don't want uploaded. Thanks for the input. ChopperP |
||||
| disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 844 |
I have updated so that the /* & */ are taken into account. This may fix it. What should happen is that the Start01.lib should be created in the directory where the bas file lives. The code will also loaded into the CMM as well. (I can change this if required) 2018-04-15_205849_MMReplace.zip Latest F4 Latest H7 |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1032 |
OK. Thank you kindly Will check on the morrow ChopperP |
||||
| disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 844 |
Updated version now supports management of libraries for the CMM (Colour Maximite) thanks to some testing and feedback by @Chopperp. Update PDF file which tells all. 2018-04-17_171231_MMReplace.pdf Updated files for installation 2018-04-17_171329_MMReplaceDistribution.zip Regards Gerry Latest F4 Latest H7 |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1032 |
Documentation looks good from my quick read. Will try out prog bit later Thanks Gerry ChopperP |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1032 |
Gerry Sent you a PM ChopperP |
||||
| disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 844 |
OK Murphy got me for not testing after a 'it should be OK, didn't change much' moment Update zip with fix. The one above is no good. 2018-04-17_195713_MMReplaceDistribution.zip Latest F4 Latest H7 |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1032 |
Hi Gerry, All working as planned. Thanks. Note. Library Files need manually CRUNCHING before upload if necessary. Have used it in anger so to speak.  Thanks again. ChopperP |
||||
| disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 844 |
Now includes MMReplace32.exe which is compiled for 32bit windows. Use MMReplace32.exe in lieu of MMReplace.exe which is the 64bit version MMReplaceDistribution.zip Latest F4 Latest H7 |
||||
| Page 2 of 2 |
|||||
 Print this page |
