Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : Napoleon Commander for CMM2
Page 5 of 5 | |||||
Author | Message | ||||
jirsoft Guru Joined: 18/09/2020 Location: Czech RepublicPosts: 532 |
Hi all, v1.40 just released with some small bugfixes and changes/improvements: ALT F4 is now used for proportional text viewer. It's slow but for reading of some longer text can be more pleasant. Used is PropText.INC, is now part of release ASCII text viewer (F3) no more precalculates total number of pages (speedup), so total number is known first when going to the last page Enjoy! Jiri Napoleon Commander and SimplEd for CMM2 (GitHub), CMM2.fun |
||||
Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 3561 |
Hi Jiri, Haven't tried it yet, but can you invoke this through * commands on CMM2 ? Like *NC Have used the original NC a lot in the past, especially since it seemed a swiss army knife of that time. With HEX viewer (editor?), picture viewer, and easy moving and copying of files. Does your NC implementation support memory outside the SD card ? Through XMODEM or so ? After some time spend on pico, I want to get back to my CMM2, since (as late adopter) I haven't seen much of it yet. Time to catch up.... I also have to get into the gutenberg reader. Volhout PicomiteVGA PETSCII ROBOTS |
||||
jirsoft Guru Joined: 18/09/2020 Location: Czech RepublicPosts: 532 |
Hi Volhout, if you have it in search path, then yes, you can start it per *nc. I'm using my frequently used programs this way: I have directory LINKS (for example A:/LINKS/), where I'm putting all "links" as short BASIC programs (NC.BAS, SE.BAS etc.). In every file is just command to run it from proper location (so in SE.BAS is just one lineRUN "A:/SimplEd/SimplEd.BAS"). Then I'm set OPTION SEARCH PATH "A:/LINKS/" and I can use *nc, *se... NC is using python script running on Mac/Linux/Win side to communicate with ESP8266 inside CMM2, so you can then use in one pane SD card (A:/) and in the second server (S:/), you can do most file operations on both places (but viewers are limited to SD card). It's in this time limited to my FW for ESP8266, mainly because of speed (and because I'm not in the need use CMM2 for internet access - I'm not seeing to much sense in it - and some basic networking, getting NTP time etc. is also supported). If you need some help, just let me know (there is also some shortcuts screen and guide under F1, but really just basic on). Ideas for improvement are also welcomed... Jiri Napoleon Commander and SimplEd for CMM2 (GitHub), CMM2.fun |
||||
Page 5 of 5 |
Print this page |