Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : PicoMite OPTION AUDIO
Page 2 of 2 | |||||
Author | Message | ||||
palcal Guru Joined: 12/10/2011 Location: AustraliaPosts: 1798 |
PicoMite 5.0703 Got the Piezo, and the alarm works fine except I can't turn it off. I though that setting the PWM pin again would stop it but I just get an error Pin24 in use. So I tried using... PWM1a, OFF... then resetting the PWM pin but PWM1a, OFF gives the error..Unknown Command "It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" |
||||
TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 5898 |
PWM 0, OFF I think Jim VK7JH MMedit MMBasic Help |
||||
palcal Guru Joined: 12/10/2011 Location: AustraliaPosts: 1798 |
Thanks Jim, I just worked it out, The Manual says "PWM chanel" so I used PWM1a instead of PWM 1 "It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" |
||||
Page 2 of 2 |
Print this page |