Home  |  Contents 
Microcontroller and PC projects
  Forum Index : Microcontroller and PC projects         Section
Subject Topic: Micromite eXtreme Firmware V5.03 Post ReplyPost New Topic
Page of 7 Next >>
Author
Message << Prev Topic | Next Topic >>
matherp
Guru
Guru


Joined: 11 December 2012
Location: United Kingdom
Online Status: Offline
Posts: 1836
Posted: 03 February 2017 at 12:56pm | IP Logged Quote matherp

This release bring the Micromite eXtreme up to the same level as the MM2 and MM+ firmware just released by Geoff.

2017-02-03_124221_MMX5.3.01.zip

2017-02-03_124327_Micromite_eXtreme_Manual.pdf

All of Geoff's bug fixes should be incorporated as well as the new functionality for the MM+. Other additional functionality is described in the Micromite eXtreme manual and here

A new PCB for the 100-pin MZ is also in development. This includes a stereo amplifier to allow the Micromite to directly drive 4ohm and 8ohm speakers. The PCB is sized to fit a 5" SSD1963, the same as the Explore100, but also includes mounting holes for a 4.3" SSD1963 display







Edited by matherp on 03 February 2017 at 1:11pm



Back to Top View matherp's Profile Search for other posts by matherp
 
Zonker
Guru
Guru
Avatar

Joined: 18 August 2012
Location: United States
Online Status: Offline
Posts: 665
Posted: 04 February 2017 at 6:25am | IP Logged Quote Zonker

Awesome Peter..!! I love the dual display option..! Is that the GPS module hookup I see..? Nice... Is there a Kit for the PCB..?
Back to Top View Zonker's Profile Search for other posts by Zonker
 
WhiteWizzard
Guru
Guru


Joined: 05 April 2013
Location: United Kingdom
Online Status: Offline
Posts: 2427
Posted: 04 February 2017 at 7:47am | IP Logged Quote WhiteWizzard

Hi Zonker,

I will hopefully be adding this MMX100 PCB to micromite.org as soon as testing is finished. Peter has had it just for a few days, and one is on its way to me hopefully receiving Tuesday . All components are here waiting to build this one .. .

Can also confirm that I have finished testing the MMX144 PCB and have now started shipping as of yesterday (UK Friday). First two sent, some more today, with hopefully the remainder next week.

WW

__________________
For everything MicroMite visit MicroMite.org

Direct Email: WhiteWizzard@MicroMite.org
Back to Top View WhiteWizzard's Profile Search for other posts by WhiteWizzard Visit WhiteWizzard's Homepage
 
matherp
Guru
Guru


Joined: 11 December 2012
Location: United Kingdom
Online Status: Offline
Posts: 1836
Posted: 04 February 2017 at 8:31am | IP Logged Quote matherp

Version 5.03.02 attached with the fix to VAL() Geoff has just implemented

2017-02-04_083132_MMX5.3.02.zip
Back to Top View matherp's Profile Search for other posts by matherp
 
robert.rozee
Guru
Guru


Joined: 31 December 2012
Location: New Zealand
Online Status: Offline
Posts: 1158
Posted: 04 February 2017 at 10:56am | IP Logged Quote robert.rozee

peter, your PM inbox is full!

cheers,
rob :-)
Back to Top View robert.rozee's Profile Search for other posts by robert.rozee
 
matherp
Guru
Guru


Joined: 11 December 2012
Location: United Kingdom
Online Status: Offline
Posts: 1836
Posted: 04 February 2017 at 10:59am | IP Logged Quote matherp

Quote:
peter, your PM inbox is full!

Sorted
Back to Top View matherp's Profile Search for other posts by matherp
 
retepsnikrep
Regular Member
Regular Member
Avatar

Joined: 31 December 2007
Location: United Kingdom
Online Status: Offline
Posts: 76
Posted: 04 February 2017 at 11:38am | IP Logged Quote retepsnikrep

Brilliant but now i want this board as well as the other one i've just ordered from WW.. Boo Hoo..

__________________
Check my website www.150mpg.co.uk for details of my Li-Ion Gen1 Honda Insights.
Back to Top View retepsnikrep's Profile Search for other posts by retepsnikrep Visit retepsnikrep's Homepage
 
WhiteWizzard
Guru
Guru


Joined: 05 April 2013
Location: United Kingdom
Online Status: Offline
Posts: 2427
Posted: 04 February 2017 at 11:42am | IP Logged Quote WhiteWizzard

Peter (Perkins),

Not available yet - but adding soon. Being a smaller PCB, it will be a cheaper PCB.

WW

Edited by WhiteWizzard on 04 February 2017 at 11:42am


__________________
For everything MicroMite visit MicroMite.org

Direct Email: WhiteWizzard@MicroMite.org
Back to Top View WhiteWizzard's Profile Search for other posts by WhiteWizzard Visit WhiteWizzard's Homepage
 
matherp
Guru
Guru


Joined: 11 December 2012
Location: United Kingdom
Online Status: Offline
Posts: 1836
Posted: 08 February 2017 at 1:18pm | IP Logged Quote matherp

Attached is release 5.3.04

2017-02-08_150728_MMX5.3.04.zip

This improves WAV file playback and lowers distortion by interpolating amplitude levels between input data points

It fixes a bug (which I believe is also in the MM+ V5.3) that causes SDcard errors to be ignored if OPTION ERROR isn't set and reported if it is

It fixes a bug when using floats as indexes to FOR loops

It includes a change in the editor which may fix a bug relating to cutting text making lines at the end of a multi-page program inaccessible. This is also in the MM+ 5.3

2017-02-12_105018_Micromite_eXtreme_Manual.pdf

Edited by matherp on 12 February 2017 at 10:50am
Back to Top View matherp's Profile Search for other posts by matherp
 
CaptainBoing
Guru
Guru
Avatar

Joined: 07 September 2016
Location: United Kingdom
Online Status: Offline
Posts: 338
Posted: 17 February 2017 at 4:20pm | IP Logged Quote CaptainBoing

WhiteWizzard wrote:


I will hopefully be adding this MMX100 PCB to micromite.org as soon as testing is finished.

WW


Hi Phil. Any update on this (and the 144pin)? Gagging now support for OV7670 is on 5.3.05

cheers

Edited by CaptainBoing on 17 February 2017 at 4:37pm
Back to Top View CaptainBoing's Profile Search for other posts by CaptainBoing
 
WhiteWizzard
Guru
Guru


Joined: 05 April 2013
Location: United Kingdom
Online Status: Offline
Posts: 2427
Posted: 17 February 2017 at 6:15pm | IP Logged Quote WhiteWizzard

@CaptainBoing:

Most MMX144 modules have now been assembled; and queuing up for testing prior to despatch.

All MMX144 Module orders up to the 17th Jan have already been tested & shipped (and every 'PCB only' order has been too). Currently I am testing orders up to 25 January and these will be despatched on this coming Monday. The remainder of Januarys orders will be shipped by Wednesday (after testing), and February's orders shipped by Friday (after assembly and testing).

I was able to assemble two modules per day (on average), and this allowed for testing time too. So it has taken a little longer than anticipated but I am a bit of a perfectionists I'm afraid to say

With Peter's new camera stuff released just now, I hope you guys that have a MMX144 enjoy playing with it (and all the other new features now available). As mentioned on the Camera thread - due to the excellent interest in the MicroMite eXtreme, I have just six MMX144 modules remaining which are strictly available on a first-come-first served basis.

I will be looking at stocking the 100MZ module once all MMX144 module pre-orders have been despatched - hopefully you can understand and appreciate this.

WW

__________________
For everything MicroMite visit MicroMite.org

Direct Email: WhiteWizzard@MicroMite.org
Back to Top View WhiteWizzard's Profile Search for other posts by WhiteWizzard Visit WhiteWizzard's Homepage
 
matherp
Guru
Guru


Joined: 11 December 2012
Location: United Kingdom
Online Status: Offline
Posts: 1836
Posted: 18 February 2017 at 5:41pm | IP Logged Quote matherp

Attached is the latest release 5.3.05 for the 100 and 144-pin parts

2017-02-18_185051_MMX5.3.05.zip

and the 64-pin part

2017-02-18_173703_MMX64V5.3.05.zip

and the updated manual

2017-02-18_173734_Micromite_eXtreme_Manual.pdf

Changes are:

Improvement to accuracy of PWM at very high frequencies. PWM frequency now can be set up to 10MHz.

SAVE IMAGE command (both versions)

CAMERA command (100/144-pin hex but only available on 144-pin chip)

Edited by matherp on 18 February 2017 at 6:50pm
Back to Top View matherp's Profile Search for other posts by matherp
 


Page of 7 Next >>
In the news...
 
Post ReplyPost New Topic
Printable version Printable version
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Powered by Web Wiz Forums version 7.8
Copyright ©2001-2004 Web Wiz Guide

This page was generated in 0.1094 seconds.
Privacy Policy     Process times : 0.02, 0, 0, 0.09