Home  |  Contents 
Windmills
  Forum Index : Windmills         Section
Subject Topic: Single blade Wind Turbine made in NZ Post ReplyPost New Topic
Author
Message << Prev Topic | Next Topic >>
DaveP68
Senior Member
Senior Member
Avatar

Joined: 25 November 2014
Location: New Zealand
Online Status: Offline
Posts: 204
Posted: 29 July 2017 at 3:03am | IP Logged Quote DaveP68

For those interested in something a bit different, here is a Single Blade Wind Turbine designed & built in Dunedin New Zealand.

Here is a link to their website Powerhouse Wind

A quote from the "Our Story" page.
"Our turbine’s elegance and innovation are no surprise to those who know anything about engineering in New Zealand".

At least one of the chaps was involved with the design & build part, is an ex Fisher & Paykel engineer. I know this fact as he told me on a phone call.

Goes to show that the innovation that went into the Fisher & Paykel Smart Drive washing machine has crossed over into this wind turbine in my opinion.

It has no tail or furling system as it follows the wind to keep the design very simple.

In strong winds the single blade uses a patented teetering hub to go horizontal with respect to the flow of wind. It also has a stall regulated system in high winds to keep it under control.

The MPPT inverter it uses is also NZ made by EnaSolar based in Christchurch.

Edited by DaveP68 on 29 July 2017 at 3:21am



Back to Top View DaveP68's Profile Search for other posts by DaveP68
 
Tim_the_bloke
Regular Member
Regular Member
Avatar

Joined: 15 November 2009
Location: Australia
Online Status: Offline
Posts: 96
Posted: 30 July 2017 at 7:27am | IP Logged Quote Tim_the_bloke

It does look elegant, and expensive. Good luck to them.
I remember some blokes I knew many years ago who built a single prop + counterweight model airplane. Flew but looked wrong.
Back to Top View Tim_the_bloke's Profile Search for other posts by Tim_the_bloke Visit Tim_the_bloke's Homepage
 
kitestrings
Regular Member
Regular Member


Joined: 23 April 2014
Location: United States
Online Status: Offline
Posts: 76
Posted: 31 July 2017 at 12:03pm | IP Logged Quote kitestrings

I wonder if they are planning to have a powered yaw system. Otherwise, initial tracking (when the wind comes up in a new direction) could be problematic. I've seen three bladed, downwind units get caught in an upwind position. ~ks
Back to Top View kitestrings's Profile Search for other posts by kitestrings
 
gpalterpower
Senior Member
Senior Member
Avatar

Joined: 19 July 2009
Location: Australia
Online Status: Offline
Posts: 156
Posted: 01 August 2017 at 12:35am | IP Logged Quote gpalterpower

Hi Dave,
was in NZ last year around the Otago area...absolutely beautiful country. I remember seeing one of these single blade mills somewhere between Arrowtown and Queenstown. Definitely a bit odd to look at but awe inspiring at the same time.

Marcus

__________________
if it aint broke dont fix it!!
Back to Top View gpalterpower's Profile Search for other posts by gpalterpower
 
Grogster
Guru
Guru
Avatar

Joined: 31 December 2012
Location: New Zealand
Online Status: Offline
Posts: 4870
Posted: 01 August 2017 at 1:54am | IP Logged Quote Grogster

Yes, there are a couple of wind-farms in central otago. They are three-blade type, about 10-meter blades from what I remember being told - they are BIG when you get up close to them, and you can see them from a long way away. I believe they are tied into the national grid. These are not residential units.

__________________
Smoke makes things work. When the smoke gets out, it stops!
Back to Top View Grogster's Profile Search for other posts by Grogster Visit Grogster's Homepage
 


If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Search the forums using Google.
In the news...
 
Post ReplyPost New Topic
Printable version Printable version
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You can vote in polls in this forum

Powered by Web Wiz Forums version 7.8
Copyright ©2001-2004 Web Wiz Guide

This page was generated in 0.0625 seconds.
Privacy Policy     Process times : 0, 0, 0, 0.06