Micromite eXtreme firmware update V5.4.09
Author | Message | ||||
matherp Guru ![]() Joined: 11/12/2012 Location: United KingdomPosts: 10181 |
Please find attached V5.4.08 for the 100/144 pin chips 2018-01-12_010028_MMX5.04.09.zip and the 64-pin chips 2018-01-12_010110_MMX645.04.09.zip This release contains the USER display driver Geoff has included in MM2 and MM+ versions 5.4.09. |
||||
Kabron![]() Regular Member ![]() Joined: 30/11/2017 Location: GermanyPosts: 65 |
Board PIC32-EMZ64, serial connection via native USB. ANSI escape sequences not work :( |
||||
matherp Guru ![]() Joined: 11/12/2012 Location: United KingdomPosts: 10181 |
If you mean you are connecting the Micromite direct as a CDC device then you should be aware that the expectation now is that you use an external USB UART such as the PIC16F1455 microbridge. The latest release of the Micromite eXTreme replaces the USB CDC functionality with USB HID HOST to allow connection of a USB keyboard. |
||||
Kabron![]() Regular Member ![]() Joined: 30/11/2017 Location: GermanyPosts: 65 |
Well, I made serial connection the same as latest release of the Micromite eXTreme via RF0/RF1 at 38400. It works but still no ANSI support. |
||||
matherp Guru ![]() Joined: 11/12/2012 Location: United KingdomPosts: 10181 |
What do you mean by ANSI? |
||||
Kabron![]() Regular Member ![]() Joined: 30/11/2017 Location: GermanyPosts: 65 |
If I undersand correctly, the microbridge does all work, related to ANSI interpretation? |
||||
Kabron![]() Regular Member ![]() Joined: 30/11/2017 Location: GermanyPosts: 65 |
ansi escape sequences. It is realized in Maximites. |
||||
matherp Guru ![]() Joined: 11/12/2012 Location: United KingdomPosts: 10181 |
The MMX is based on the micromite not the maximite. I am still unclear what you are trying to do. The micro bridge just passes ASCII characters to the micromite. It does not interpret anything. If there is something the normal micromite does that the MMX doesn't then it is a bug otherwise it it not current scope. |
||||