Guru
Joined: 11/12/2012
Location: United KingdomPosts: 11065
| Posted: 06:37pm 16 Aug 2018 |
For Trevor, TassyJim and WhiteWizzard
If you want to use the SDcard slot on the V1.0 backpack with the latest software make the following three connections (I used wirewrap on the pins):
Pin 98 to pin 20
Pin 116 to pin 21
Pin 113 to pin 19
Then the setup command is:
OPTION SDCard 112,87
Don't then use any of 98,99,111,112,113,116 or 87 for anything else.
The on-board card slot then works nicely for me at least.