Guru
Joined: 11/12/2012
Location: United KingdomPosts: 11065
| Posted: 05:48pm 28 Aug 2018 |
I decided it would be good idea to increase the size of the backpack to allow the 5" SSD1963 display to be mounted properly. As this gave me more real estate I've also included a Raspberry Pi style header which will allow Pi HATs such as ILI9481 style displays to be plugged in. I've also added an optional IR receiver and optional pullups on 8 I/O lines for things like DS18B20. This is then Version 1.3. As always comments appreciated. Ground planes are removed for ease of inspection.
I've checked COM4 RX and TX on the Nucleo Arduino header and they are definitely the correct way round in the latest release of the firmware - someone suggested there may be an issue.
