Guru
Joined: 07/11/2007
Location: AustraliaPosts: 1904
| Posted: 09:52am 20 Jun 2019 |
Good buy Mark and just a little more expensive than the ones I got.
Beware, the terminal screws might be an American gauge thread (mine were) and they also were too short for 6mm bus bars. Fortunately I had some gauge screws from a junked Yankee computer that fitted.
The thread looks like 5mm metric, try a M5 screw by hand, if it does not go in all the way *easily* don't force it, use the correct screw.
These caps are too expensive to wreck the terminals
.The data sheet might tell you what type screws - I did not look there.
Klaus