ILI9488 drivers: MM2 and MM+

Author	Message
David_Plumley Newbie Joined: 03/01/2022 Location: New Caledonia Posts: 8	Posted: 05:35am 08 Jan 2022       Well, sorry to have put you all to so much trouble... I finished connecting the ILI9488 to my E100, using a 5V socket on one of the mikroBUS connections for the LED pin on the display. Peter's driver worked perfectly... I then plugged the display back in the MM+ BackPack, ran Peter's driver, set the display brightness as Bill suggested and... presto! I'll see if I can't put the PWM command in the startup subroutine, so that I don't get caught out again... As I mentioned (maybe in my post that disappeared), it is sometimes difficult to see the wood for the trees! Once again, thank you for all your suggestions. I'll try and be a bit less silly next time I post... Have a nice day. David.