ILI9488 drivers: MM2 and MM+

Author	Message
Turbo46 Guru Joined: 24/12/2017 Location: Australia Posts: 1636	Posted: 01:55am 09 Jan 2022       phil99"s solution is another that could well work. The only issue is that it only enables the DATA OUT pin to pull the line high when CS is low, when DATA OUT is low it is not actively pulling the line low. A pull down resistor (to 0v) on the transistor collector would help. Strange that Peter doesn't seem to want to comment on the use of a series resistor when it was he that found it to work? Bill