ILI9488 drivers: MM2 and MM+

Author	Message
phil99 Guru Joined: 11/02/2018 Location: Australia Posts: 2398	Posted: 09:20pm 22 Nov 2022       @stanleyella Just connect it as per the diagram above. T_DO AND SD_DO go directly to the PicoMite MISO. Only the LCD_SDO has a problem. You could first try a 680R between SDO and the PicoMite MISO, see if everything works properly (blit, touch & SD). If it does that is all you need to do. Touch should be ok but SD cards might not, in which case use the circuit above.