ILI9488 drivers: MM2 and MM+

Author	Message
stanleyella Guru Joined: 25/06/2022 Location: United Kingdom Posts: 2372	Posted: 05:42pm 24 Nov 2022         phil99 said   @stanleyella Just connect it as per the diagram above. T_DO AND SD_DO go directly to the PicoMite MISO. Only the LCD_SDO has a problem. You could first try a 680R between SDO and the PicoMite MISO, see if everything works properly (blit, touch & SD). If it does that is all you need to do. Touch should be ok but SD cards might not, in which case use the circuit above. just lcd and touch connected but gui touch calibrates fails