H743Zi2 Board
Author | Message | ||||
KeepIS![]() Guru ![]() Joined: 13/10/2014 Location: AustraliaPosts: 1868 |
Really hated loosing an inside row pin. It looks like you are toggling it LO -> HI, but it needs to be HI -> LO as the USB e-switch is opposite to the V1 boards, it needs to be LO to enable +5v USB, at least that's how it is on both my boards. NANO Inverter: Full download - Only Hex Ver 8.1Ks |
||||