H743Zi2 Board
Author | Message | ||||
KeepIS![]() Guru ![]() Joined: 13/10/2014 Location: AustraliaPosts: 1868 |
Reset line goes high instantly at power on and stays there. Put a 22uf from the Reset line to GND and it powers up every time? The question mark is not why - I know why the 22uf works as I expected it to once I looked at Reset line with a DSO. The question is - Why is reset not working normally, OR, is reset working as it should and there is another underlying problem at power up that requires a reset to overcome it. I'm tired of chasing my tail. NANO Inverter: Full download - Only Hex Ver 8.1Ks |
||||