Guru
Joined: 20/06/2011
Location: AustraliaPosts: 2981
| Posted: 02:16am 08 Sep 2019 |
Hi All,
Thank you for your input.
I most likely will scrap the PS2 connectors as they take up so much room, and use a header to gain connectivity if required, I might make a small daughter PCB that has the Audio jack and kb/mouse on it..
I have ordered one of these to strip down.
It would be easy enough to use the cables and terminate them at a header to match the main board..
As to the flash memory, I have bought 10 to play with (A massive 55c AU each for the W25Q64FVSSIG).
I have had a quick scan of the data sheet and I am a little concerned about the following specs.
I am yet to determine what Fr really means but if operating at 80MHz/33Mhz the max Vcc seems to be 3.0v
Hmmm... I am sure they work well but just a thing to ponder
Kind Regards,
Mick
Edited 2019-09-08 12:18 by bigmik
Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<<