BME280 accuracy using Micromite

Author	Message
TassyJim Guru Joined: 07/08/2011 Location: Australia Posts: 6546	Posted: 09:58pm 16 Sep 2019       Can you run the same code on a micromite to see if there is a similar difference in readings. If there is a difference, you can then print the calibration values etc to see where things deviate between the platforms. I don't have a PiZero so can't do it here. I find my BME280 reads higher than the others when there is more air movement. When there is little air flow, the difference between the various modules is much less. This is this mornings test:   Quote   07:46:51 T(BMP180): 14.0 P(sl): 1028.5,T(DHT22): 13.7 H: 45.5,T(DS18B20): 14.0 BME280: T: 15.1 P: 1028.4 H: 42.7 07:47:01 T(BMP180): 14.0 P(sl): 1028.6,T(DHT22): 13.7 H: 45.4,T(DS18B20): 14.0 BME280: T: 15.2 P: 1028.3 H: 42.8 07:47:11 T(BMP180): 14.0 P(sl): 1028.7,T(DHT22): 13.7 H: 45.4,T(DS18B20): 14.0 BME280: T: 15.2 P: 1028.3 H: 42.7 07:47:21 T(BMP180): 14.0 P(sl): 1028.5,T(DHT22): 13.7 H: 45.5,T(DS18B20): 14.0 BME280: T: 15.2 P: 1028.3 H: 42.6 A copy of the code you are using will help. Jim Edited 2019-09-17 08:01 by TassyJim VK7JH MMedit