Continuation from cog31s GPS issue.

Author	Message
goc30 Guru Joined: 12/04/2017 Location: France Posts: 435	Posted: 10:25am 08 Oct 2019         panky said   Could you use a 555 monostable triggered by the 1PPS signal and then the reasonably precise 10mS timing to turn the relay off? Use the Micromite as a control manager to either enable of disable the triggering of the 555? with mmbasic, problem is not to have an exact interrupt signal (it work good), but only why and where mmbasic spend time between hard or timer interrupt and user begin's program interrupt subroutine.