Solar buck converter


Author Message
mackoffgrid

Guru

Joined: 13/03/2017
Location: Australia
Posts: 460
Posted: 10:19pm 07 Nov 2019      

Hi Nick,  

Very nice.  You explanation covers it pretty well.  A schematic is probably not important but would be nice if you've done one.

I'm playing with charger design atm (higher voltage though) and was debating with myself whether to use a uProc or dedicated controller.  Seeing this post I'm going to try the uProc approach first.


BTW, Do I spot a 3d printed former  

Cheers
Andrew