Guru
Joined: 05/02/2015
Location: AustraliaPosts: 484
| Posted: 06:53am 22 Mar 2020 |
G'Day All
For some years now I have been using KCAM on an XP PC driving a small CNC machine to engrave simple PCBs. Sadly the PC died. I think it got over excited when it saw it's new home. The PC has now recovered but KCAM has gone and does not seem to be available.
Is there some way of getting the KCAM software?
Peter
Guru
Joined: 05/02/2015
Location: AustraliaPosts: 484
| Posted: 12:10am 23 Mar 2020 |
Problem solved.
I found KCAM on a laptop and that fixed that. Just as I was getting used to the idea of MACH3.
Peter
Edited 2020-03-23 10:11 by PeterB