150V 45A MPPT - roll your own


Author Message
poida

Guru

Joined: 02/02/2017
Location: Australia
Posts: 747
Posted: 10:25am 24 May 2020      

I will probably never use float, so I will put a large ABSORB time in place.
And just set the ABSORB voltage as the final bv I want to maintain.

Just because there is FLOAT does not mean we have to use it.

There are 2 types of Nanos.
One type uses the Old bootloader.
The other type uses the default bootloader.
The only way to find out which one to use is to try
one setting and if it fails use the other.
Edited 2020-05-24 20:34 by poida