Solar electric hot water conversion

Author Message

Joined: 27/03/2020
Location: Australia
Posts: 17
Posted: 04:06am 15 May 2020      

Long story short, I fried them, the temp got to 110 deg C +, back to the drawing board, I am running at about 65 volts with a current of 17 amps, just wondering if I have a gang of 4 or of these mosfet I would distribute the load a lot better and with a resistance of 0.082 Ohms between the source and the drain that resistance would maybe the source of the heating up
0.082 ohms using 1 mosfet
0.022 ohms using 4 mosfets
0.013 ohms using 6 mosfets