Guru
Joined: 31/10/2011
Location: AustraliaPosts: 349
| Posted: 11:27pm 20 Sep 2020 |
Thanks Warpspeed & NPHighview
I decided to use a motor I extracted from an old Cassette Tape Player. However, it would not run in reverse properly. So I opened it and found it has an electronic speed control. See the photo. I was surprised that it was able to run in reverse at all given the speed control electronics. But I don't have a circuit of it & did not waste time working it out. So I cut the components off except for the trim pot & connected wires to the commutator tags.
So it now runs properly in both directions.
Motor EG-510AD-TA.zip.