CMM2: V5.07.00b11: json support with full ESP-01 example code


Author Message
thwill

Guru

Joined: 16/09/2019
Location: United Kingdom
Posts: 2830
Posted: 05:35pm 30 Jan 2021      

  matherp said  This is for running on a regular CMM2 - just connect a standard ESP-01 to com port 2 and power it from 3.3V/GND (make sure the CH-PD pin is also pulled high) and you have network access


@matherp

Didn't you say we shouldn't drive an ESP-01 from the CMM2's power rails a couple of months back because it can draw too much current under some loads?

Tom