Time for a new Warpinverter build

Author	Message
rogerdw Guru Joined: 22/10/2019 Location: Australia Posts: 952	Posted: 01:36pm 20 Mar 2021         Warpspeed said   Definitely much easier. If the last couple of turns look tight, just stick a big screwdriver through the hole and wiggle it around. That will make room.  But I doubt if you will even need to do that. Yep, plus a can of silicone spray and I'll be right. I've finally wound the last secondary winding for #2 Tx so need to start planning for #1.