Guru
Joined: 07/07/2008
Location: AustraliaPosts: 423
| Posted: 08:49am 16 Apr 2021 |
Looks good Poida!
If you are spinning another board, I'd suggest putting holes in the PCB for mounting the heatsinks.
With my warp power board, I made it compatible with this pre-drilled TO247 heatsink from Ali express. The dimensions are all in the product description and it saved a lot of work. Even better when it all lined up nicely. The spacing of each MOSFET on mine is 22mm. But there are others to choose from.
