Guru
Joined: 02/02/2017
Location: AustraliaPosts: 1471
| Posted: 11:53am 20 Apr 2021 |
It's different for me. EasyEDA and JCLPCB produce boards I find easy
to solder and rework so I'm fine with the library parts.
This PCB was the result of spare time at work today. I chose to do it with 1mm
track widths to make it hard to layout, as an exercise.
No tracks went between 0.1" pins of the Nano or ICs.
Probably only need 0.5mm track widths or less.
It's not a big deal to rework the PCB. Something to do at work...
Thanks for your advice tho.