H-Bridge Controller Using Raspberry Pi Pico

Author Message
Solar Mike

Joined: 08/02/2015
Location: New Zealand
Posts: 962
Posted: 12:23am 31 Jul 2021      

I think cct is now ready to start a PCB layout, I have used up all the Pico's pins, mainly so I can experiment with the Pico for other projects. Any errors will get picked up in pcb design layout.

Most of the additions are to the outputs, I have used a couple of Bi-directional 3.3-5v converters so I can use 5v logic I2C, serial devices.