Guru
Joined: 05/03/2018
Location: NetherlandsPosts: 5058
| Posted: 09:03pm 18 Sep 2021 |
Hi Geoff,
Some feedback on the manual
- maybe add a note that while setting options, the usb connection is sometimes lost. Teraterm acts friendly and reconnects. Not all serial terminal emulators are so forgiving. Putty is not. You have to manually reconnect.
Page 8: the pico io pins cannot drive much current, maybe use a resitor of 470 ohm, not 82.
Page 10: not all pico s run at 250Mhz. That is why Peter changed the clock to a lower value default.
Page 119: the pulsin text contains reference to 40Mhz. 48Mhz is the minimum.
Thanks for writing this document..
Volhout