PicoMite V5.07.01 betas


Author Message
Kabron

Regular Member

Joined: 30/11/2017
Location: Germany
Posts: 62
Posted: 12:22pm 19 Nov 2021      

  matherp said  
  Quote  I entered OPTION SERIAL CONSOLE GP0,GP1 command and lost connect with my pico at all.
It does not answer via USB nor via GP0/1.
Only full flash erasing and reflashing returned to operation.


The command changes all console I/O to the com port specified. You should test your com connection with setpin and open "comn:" before executing the option command. The console is set to 115200 baud.

You should be using b6

It is very dangerous command.
Maybe, before execution, it is reasonable to test if these preparations were already done? Because, if not, this command irreversibly brick any communication.
Edited 2021-11-19 22:24 by Kabron