About time the ArmmiteH7 got some TLC: V5.07.01 betas


Author Message
matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 10180
Posted: 02:05pm 24 Jan 2022      

  Quote  I think I solved it.  I will replace my 8Mhz one with a 25Mhz and change the caps too.
That is why there is the reference in hal for the 25Mhz clock.


The Armmite code doesn't work and cannot work with a 25MHz crystal. You must use 8MHz. Your load capacitors on the 8MHz seem very low, normally 18-22pf seems appropriate. Everything suggests that one of the oscillators isn't running.

Loading over USB or with the ST-LINK uses an external clock so these will work regardless