Regular Member
Joined: 28/07/2017
Location: AustraliaPosts: 78
| Posted: 12:36pm 25 Jan 2022 |
Why would 5.05.11 work fine, including the RTC if one of the oscillators is not working, yet 5.07.0b1 won't run?
The new Hal with the ver V chip must recognise that a crystal is connected rather than an 8 MHz MCO.
If it is impossible to use a crystal with ArmmiteH7 on the ver V chip, I will have to provide an 8Mhz clock source I guess?