An other model of RP2040

Author Message
Mixtel90

Guru

Joined: 05/10/2019
Location: United Kingdom
Posts: 6024
Posted: 06:44pm 01 Apr 2024      

  Quote  f I plug a usb hub powered 5V into this rpi and usb kb into hub be able to use pico usb?

That might work.

To make it work to USB spec you should really also have a USB lead plugged in that has two 15K resistors from D+ and D- to GND. With this board you can't connect them any closer to the chip but that probably won't matter.

If you are getting the 4M version you may find that they will clock faster than the 16M ones.

Incidentally, the RP2040 stepping number is B0 for the original chips.
B1 has changes to the boot rom on the chip which enhance the floating point routines amongst other things.
There is now a B2 but it's not in my datasheet.
Edited 2024-04-02 04:51 by Mixtel90