Guru
Joined: 25/06/2022
Location: United KingdomPosts: 2159
| Posted: 06:34pm 10 Apr 2024 |
As my drift is this "new" pico in usb mode so plugged a usb hub type c into pico and usb kb into hub and worked.
I will power the hub, micro usb 5v, and see if it powers the pico and kb.. after remove 5v to vin. this will mean blobbing diodes not needed to get this pico working usb
edit Powering usb hub doesn't power pico, so only blobbing diode :(
edit again.. obvious it would not power pico, it would not power a pc usb port. doh
Edited 2024-04-11 05:24 by stanleyella