Off grid inverter Panelage.


Author Message
Revlac

Guru

Joined: 31/12/2016
Location: Australia
Posts: 687
Posted: 10:24am 06 Aug 2022      

Davo,

I think they are covering there backsides.

It should handle more wattage, as long as the voltage is still within its limits, I haven't over panelled the old 5048MS that I have, but realised it was holding back due to some current limit setting, it was limited to 30amp or something, it would sneak over that limit for a few seconds but not long.
I opened it up to max after I found it, I would suggest limiting the current a bit if you are going to over panel it, give it a chance to throttle it back after a cloud passes, cloud edge affect.


You only need the extra panels for bad weather anyway.