Guru
Joined: 03/06/2019
Location: AustraliaPosts: 1533
| Posted: 09:59am 10 Aug 2022 |
Good point about the battery level and not taking the charge.
That said, one of the reasons I wanted to overclock them is so when I am using an appliance with high draw, I wanted the panels to be able to provide all the power possible to cover the load.
I notice the inverter chargers put out more than they will take in.
Also thinking today that an easy way around any problems might just be to use a seperate charge controller linked direct to the batteries.
That way I can have another 100 amps or whatever going in and that won't stress the main unit.
Might look at The MSB units as I think they have some Decent MPPT's.