Warpinverter Build


Author Message
Alston
Regular Member

Joined: 04/04/2021
Location: Australia
Posts: 62
Posted: 09:41am 28 Nov 2022      

I have started on the enclosure and have gone down a similar path to Tinker/Murphy's Friend of using the lids from the Aerosharp enclosures to make the top and bottom panels. Here are the photos of the transformer mounting. There are 2 air intakes on the bottom of the unit that will bring air up through the centre of the 2 bigger transformers, as you might be able to see I have fitted fly screen on them. I have epoxied some rubber to the transformer mounts to cushion the wire from the clamps.