Regular Member
Joined: 04/04/2021
Location: AustraliaPosts: 63
| Posted: 01:15pm 05 Dec 2022 |
The enclosure so far. My original plan was to mount the heatsink facing down with the caps standing up but that wouldn't sit into the footprint of the Aerosharp lid so I had to turn it sideways. This gave me the challenge of how to mounts the capacitors. I used threaded rod and aluminum angle to mount to the plastic support to which takes the weight of the caps.
Can anyone point me in the direction of the DC breakers they have?
Edited 2022-12-05 23:19 by Alston