Guru
Joined: 07/08/2011
Location: AustraliaPosts: 6546
| Posted: 09:00pm 24 Oct 2022 |
With the MMCC program open, unplug your picomite and then re-insert it.
Messages should appear saying port: comx removed/inserted, where comx is the port your device uses.
If that doesn't happen, you have problems.
Make sure you tell MMCC that your device is a picomite. In your first post, you had Micromite selected.
Telling it that it is something it is not will confuse things.
MMEDit 5 will list current active ports but it doesn't know which one you want to use.
Jim