Turbo46
 Guru
 Joined: 24/12/2017 Location: AustraliaPosts: 1638 |
Posted: 12:13am 14 Nov 2022 |
|
|
|
Sometime after CMM2 MMBasic V5.06.00 the Nunchuk function description in the manual changed from:
NUNCHUK(funct [, channel]) to: NUNCHUK(channel, funct)
This appears to be wrong. As the manual says, the channel is optional and if omitted it will default to channel 3 which is the one used for the front connector on the original CMM2.
The CMM2 does not accept the second version of the command.
Bill Keep safe. Live long and prosper. |