Guru
Joined: 24/12/2017
Location: AustraliaPosts: 1419
| Posted: 06:16am 22 Nov 2022 |
I had some problems with this firmware. A couple of times the keyboard would not work. Because I had the wrong keyboard option set (UK not US), I changed the keyboard option.
After that the keyboard only worked very occasionally after powering down and up. No console to teraterm either. I tried another keyboard and power supply and got no improvement.
Eventually I re-flashed the CMM2 with 5.07.02b6 and all is good again.
It was a bit flaky before I changed the keyboard.
Bill